Maintenance Management

Viking has the expertise to help operators develop maintenance philosophies, procedures, and a maintenance management system.

Our Services

  • Computerized Maintenance Management System (CMMS) Development

  • Spare Parts Development

  • Reliability Studies

The Viking Operations Readiness team takes a systems view.

At a minimum, successful operations readiness efforts involve operability reviews, development of the operations and maintenance philosophies and procedures, development of the maintenance management system and training of operators for initial startup and operations.

Yet, these efforts normally start too late and are frequently inadequately resourced. Operations readiness efforts started late in a project can’t reach their potential. While the design may be executed in silos, the operations readiness planning cannot.

The Viking Operations Readiness team takes a systems view. Taking a systems view enables us to develop solutions that cross many different disciplines and boundaries allowing the operations team to be efficient and effective.

Read more about our Maintenance Planning & Spare Parts Services below:

Computerized Maintenance Management System (CMMS) Development

  • Asset Hierarchy &

  • Equipment Attribute Development

  • Preventive Maintenance Development

  • Bill of Material Development

Spare Parts Development

  • Recommended Spares List Development (SPIR, SPIL)

  • Spare Parts Vendor Interfacing

  • Spare Parts Analysis

  • Bill of Material Development

Reliability Studies

  • Reliability Centered Maintenance (RCM)

  • Failure Modes & Effects Analysis (FMEA)

  • Computerized Maintenance Management System (CMMS) Development

Consult Our Specialist

Featured
Howard Duhon, P.E.
Howard Duhon, P.E.

Topsides Operations Senior Advisor

Howard has 38 years of work experience, with 15 years in Petrochemical Industry in process and project design roles. For the last 23 years, he has been in Oil and Gas consulting roles with the 12 years being involved specifically in Systems Engineering.

Connect on LinkedIn

Related Resources

Related Technical Articles, Courses & Calculators
Technical Article
10 Steps to Safely Handling Failed Parts for Laboratory Testing
Technical Article

So your pipe burst, your pump shaft snapped, or your welded joint split, and you need to figure out why and how to fix it. The next steps you take can make the difference between finding answers and leaving the mystery unsolved until the next failure.

Technical Article
Technical Article
A Simplified, Yet Rigorous Approach to Root Cause Analysis
Technical Article

We have many options for conducting root cause analyses (RCA) including TapRooT™ and CAST/STPA. The method described here is the method developed by GATE to simplify the analysis while maintaining adequate rigor.

Technical Article
Technical Article
HAZOP Risk Assessment via the RRR Matrix
Technical Article

The GATE approach to risk ranking makes risk assessment easier, more accurate and more repeatable by incorporating LOPA insights into the risk matrix approach.

Technical Article

Related Project Experience

Project Successes
Murphy - King’s Quay Commissioning

GATE Energy was responsible for pre-commissioning, commissioning, regulatory testing and vendor management for all Topsides systems of the King’s Quay FPU, both in South Korea and the United States / Gulf of Mexico. Viking, the engineering arm of GATE Energy, was contracted to assist with the development of the topsides standard operating procedures (SOPs).

Cost-Effective Gas Compression System Expansion Study

A winter-peaking natural gas storage plant undergoes a production expansion which includes infill well drilling and a gas compression system expansion.

BHP Billiton - Shenzi Waterflood Commissioning

GATE was involved early in the seawater treating design basis to influence / impart operability and commissioning efforts. From the design phase, GATE became responsible for dynamic commissioning and start-up during the offshore phase.

Next

Planning, Procedures & Operator Training