PFU-A

Filtration Unit Model A: Pneumatic, Small Footprint


Product Description

BlueFin Model A filtration units are designed for low volume flushing and testing of production, completion and subsea components and tools.

The two-stage, multiple-line pneumatic filtration unit is rated for 15,000 psi and contains 4 separate test/injection and return points for multiple line filtration.

The Model A filtration unit is equipped with one 10’ Pall 5 micron Pall filter on suction end and Two Pall corp. filter canisters on return for maximum filtration. There is a separate close recirculation loop for bulk filtration of fluids along with sample ports for each injection point for fluid analysis.

BlueFin Model A filtration units can achieve filtration throughout the entire system by establishing filtration on the suction side of pump and the return side of the pump.

Benefits & Applications

  • Four separate test/injection and return points for multiple line filtration.

  • 40 gallon local tank and a selector valve to allow unit to pull fluid from a remote tank as well.

  • Units are in a self-contained enclosed skid suitable for offshore and set up for easy transportation.

General Specificatons

  • Gallons Per Minute: 3

  • Max Pressure Rating: 15,000 psi

  • Pad Eye Specs: GoM Lifting Specs

  • Weight: 1,900 lbs

  • Dimensions: 5.5’H x 6’L x 3’W

Pump Specs

  • Pneumatic High Volume and High Pressure Pump

 

Previous
Previous

PFS-B

Next
Next

PFU-B