Water Treatment & Filtration: Decommissioning, Hydrotesting & Waste Water Treatment
From offshore pipeline abandonments and produced overboard water compliance, to onshore hydrotest water treatment and fluid handling, our water treatment and filtration services team understands the full lifecycle approach to these scopes.
We maintain the mechanical assets required for the majority of operator’s filtration needs. Our management can fully engineer the proper pre-planning and permitting processes and close of each project in compliance.
Our Water Treatment and Filtration team combines decades of industry service with educated SMEs to ensure this delivery of compliance and security.umatic Leak Testing services extend to commissioning, product evacuation, maintenance shutdown, leak testing, and general pigging operations. If your SOW demands replacement of hazardous atmospheres, inert drying capabilities, integrity testing, or product evacuation, partner with our operations group to understand the complete benefits of nitrogen use.
Applications
Pipeline Decommissioning
Offshore Overboard Produced Water Treatment
Hydrotest Water Treatment
ILI Operational Effluent Treatment
Waster Water Effluent Treatment
Fluid Handling, Flowback
Equipment: Meets 14C Requirements
Pipeline Mechanical Filtration Equipment:
5 BPM Systems
10 BPM Systems
20 BPM Systems
Well Testing Mechanical Filtration Equipment:
Up to 15,000 BPD Systems
Acid Stimulation & Completion Flowback Equipment:
Up to 10,000 BPD Systems
Incorporation of DGF Technology
Compliance-Ready Onsite Storage Containment
State & Federal Permitting
Post Project Permit Reporting
Sampling and Recording
Environmental Consulting Support
Products
Carbon Media
Consult a Specialist
Resources
Project Experience & Case Studies
GATE Energy provided full commissioning and start-up services for facility offshore Gulf of Mexico. Yard commissioning work completed in South Korea.
GATE Energy provided full commissioning and start-up services for facility offshore Gulf of Mexico. Work performed in Singapore and US. Full commissioning services including systems completion utilizing Omega PIMs. Yard phase commissioning in Singapore.
GATE Energy was responsible for pre-commissioning, commissioning, regulatory testing and vendor management for all Topsides systems of the King’s Quay FPU, both in South Korea and the United States / Gulf of Mexico. Viking, the engineering arm of GATE Energy, was contracted to assist with the development of the topsides standard operating procedures (SOPs).
GATE Energy provided umbilical commissioning planning and execution for subsea tieback to Bullwinkle facility offshore Gulf of Mexico.
GATE Energy provided full commissioning and start-up services offshore Israel. Due to various project engineering and construction delays on the Noble Energy Leviathan project, GATE was tasked with compressing seven months of onshore commissioning into only three months. GATE was able to quickly increase resources and personnel to mitigate a schedule impact and Leviathan topside left the fabrication yard one hundred percent commissioning complete for onshore scope. This greatly reduced the amount of potential offshore carry-over work and facilitated a successful offshore campaign to deliver the facility for initial start-up on time.
GATE Energy provided full commissioning and start-up services for subsea tieback offshore Gulf of Mexico. Provided subsea systems completion and umbilical commissioning planning services for subsea tieback offshore.
GATE Energy provided full commissioning and start-up services for subsea tieback offshore Gulf of Mexico.
GATE Energy provided full commissioning and start-up services offshore Gulf of Mexico. GATE provided full systems completion and commissioning services and played a key role in safely delivering the Delta House FPS and achieving first oil just three years after discovery was made by LLOG Exploration.
GATE Energy provided full commissioning and start-up services for tieback to Tarantula facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for subsea tieback to Tarantula facility offshore.
Commissioning provided offshore commissioning and start-up support for subsea tieback offshore Gulf of Mexico.
GATE Energy provided commissioning services for control system hardware replacement on Constitution facility offshore Gulf of Mexico.
GATE Energy provided full commissioning and start-up services for tieback to Lucius facility offshore Gulf of Mexico. Provided umbilical commissioning planning and execution for subsea tieback to Lucius.
GATE Energy provided full commissioning and start-up services for first ever Amine Unit on a floating facility offshore Gulf of Mexico
GATE Energy provided turnkey full commissioning, systems completion and start-up services for facility offshore GoM. Provided umbilical commissioning planning and execution for facility offshore Gulf of Mexico.
GATE partnered with Anadarko to execute full systems completion and commissioning services on the Lucius and Heidelberg Spars. Anadarko employed a “design one, build two” philosophy in development of these new-build, greenfield facilities. Though the Lucius project was a success in its own right, the extensive implementation of project lessons learned and carry-over of personnel led to GATE safely and successfully delivering the Heidelberg project three months ahead of schedule and significantly under budget.
GATE Energy provided full commissioning and start-up services offshore Gulf of Mexico. Provided umbilical commissioning planning and execution for facility offshore Gulf of Mexico.
GATE partnered with Anadarko to execute full systems completion and commissioning services on the Lucius and Heidelberg Spars. Anadarko employed a “design one, build two” philosophy in development of these new-build, greenfield facilities. Though the Lucius project was a success in its own right, the extensive implementation of project lessons learned and carry-over of personnel led to GATE safely and successfully delivering the Heidelberg project three months ahead of schedule and significantly under budget.
GATE Energy provided full commissioning and start-up services for a POB expansion project followed by subsea tieback to Lucius facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for subsea tieback to Lucius.
GATE Energy provided full commissioning and start-up services for tieback to Constitution facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for tieback to Constitution facility in Gulf of Mexico
GATE Energy provided full commissioning and start-up services for tieback to Marlin facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for tieback to Marlin facility in Gulf of Mexico.
GATE Energy provided (full commissioning services for addition of gas lift to Horn Mountain facility offshore Gulf of Mexico.
GATE Energy provided full commissioning services for addition of gas lift to Marlin facility offshore Gulf of Mexico.
GATE Energy provided commissioning management and start-up support for facility offshore Equatorial Guinea.
GATE Energy provided client commissioning oversight and start-up support for FPSO project offshore Ghana. Also provided client subsea commissioning oversight and start-up support for FPSO.
GATE Energy provided client commissioning oversight and start-up support for FPSO project offshore Ghana.
GATE Energy served Anadarko project team as Commissioning Technical Lead responsible for developing commissioning philosophies and influencing field design during Pre-FEED and FEED project stages.
GATE Energy provided full commissioning and start-up services for subsea tieback offshore Gulf of Mexico.
GATE Energy provided systems completion and commissioning execution services provided for onshore gas loading terminal near Haifa, Israel. Planning and Systems Completion efforts primarily located in Houston, TX with regular trips to Israel.
BlueFin’s filtration units are capable of high volume and/or low volume filtration and is designed to mitigate particle contamination.
BlueFin personnel are trained in particulate counting standards such as NAS 1638, ISO 4406 and SAE 4059 rev. D and E.
BlueFin maintains the mechanical assets required for the majority of operator’s filtration needs. From offshore pipeline abandonments and produced overboard water compliance, to onshore hydrotest water treatment and fluid handling, our team understands the full lifecycle approach to these scopes.
This industry requirement demands both expertise in trained, accomplished personnel and best in class filtration equipment. BlueFin’s filtration units are capable of high volume and/or low volume filtration and is designed to mitigate particle contamination.
Our technical range follows the Umbilical life cycle, starting with initial testing at the manufacturer’s yard, monitoring during installation, and commissioning prior to system start-up, to critical maintenance services for flow assurance remediation and fluid cleanliness, and ending with final decommissioning of the umbilical system.
BlueFin manifold systems are designed for high pressure, multiple line flushing and pressure testing.
Our bulk filtration unit is capable of NAS filtration and flushing of Bulk fluids with little to no pressure and can handle up to 125 GPM with 1-micron filter.
