Preparing for operation of a major oil and gas facility is a daunting task. Viking provides standard operating procedure (SOPs) generation, maintenance planning (CMMS, Spares), FMEA and RCA studies and Control System Tuning and HMI Screen Development. 

BlueFin maintains the mechanical assets required for the majority of operator’s filtration needs. From offshore pipeline abandonments and produced overboard water compliance, to onshore hydrotest water treatment and fluid handling, our team understands the full lifecycle approach to these scopes.

The traditional way of isolating a flowline, is to install numerous blind and skillet flanges, as well as utilizing air movers, to clear the flowline of harmful vapors. When utilizing air movers, you aren’t always able to control where the vapors go once released to the atmosphere. Wind direction plays a major part in this process.

Viking Engineering has performed many materials selection projects to help operating companies produce oil and gas safely and within budget.

GATE follows a similar methodology to threat identification in risk assessment (e.g. FMEA), and analyses the relations between possible causes, and prevention and maintenance measures to highlight the cause(s) to be addressed.

Provides fit-for-service evaluations, testing and analysis for evaluating complex downhole failures, pipeline failure investigations and forensic services for midstream and downstream clients and also provides services to the renewable energy sector.

Metallics and Non Metallics Materials Selection, Field Corrosion Studies, Fit-for Service Assessment, Integrity Assessments and Life Extension Engineering Assessments

Forensic Engineering, Field Investigation, Legal support / Expert Witness, Root Cause analysis, Sample Collection, Proprietary Failures Database and Fit-for Purpose Evaluations

The Corrosion and Materials Team for oil and gas developments and water and gas injection systems forms one of Viking’s core oil and gas engineering services.

Viking can help you design and implement a tailor-made Risk Based Inspection (RBI) Program.

Combining the engineering studies such as modeling, risk identification, etc. with field techniques for inspection, maintenance and surveillance, process efficiency and optimization, and rehabilition operations.

GATE can improvise, implement and manage a cost-effective plan for your asset to ensure safe and continuous operation.

Integrity engineering consulting starts at design stage where the corrosion control strategy is laid-out to reach the desired service life with minimum interruption.

At Viking, we take Flow Assurance modeling to operations by using a systems engineering standpoint addressing the challenges from modeling to development of operational strategies to optimize the production system.

Scalable to turnkey pipeline blockage remediation using our systems engineering approach.

Operations Readiness systems developed late in a project and in silos can’t reach the potential of becoming the powerful tools that they were developed to be.

Viking uses an innovative phased approach. High level SOPs are developed early based on the PFDs. These are then matured to mid-level and finally to detailed procedures as the project matures.

Life extension is a comprehensive review of a facility or vessel to determine if improvements are required, and what is needed to extend the operational life.

Viking’s Chemical Systems Engineering team is engaged in all aspects of chemical-related technology for offshore and onshore facilities. The team focuses on production chemistry solutions, chemical injection system design and chemical umbilical commissioning.

Planning and commissioning management, Integrity Management, Vendor and Sub-Contractor Selection and Management , Hydrotesting, Preservation (e.g. Corrosion Analysis and Prevention), System Drying and Flow Assurance Modelling.