The GATE Integrated Risk Management Team aims to provide solutions that target the challenges associated with offshore and marine project delivery. This includes Station Keeping ,Vessel Integrity, Marine SIMOP's and incident prevention.

Preparing for operation of a major oil and gas facility is a daunting task. Viking provides standard operating procedure (SOPs) generation, maintenance planning (CMMS, Spares), FMEA and RCA studies and Control System Tuning and HMI Screen Development. 

Well Planning & Configuration, Tubular Design, Evaluation of Connections, WELLCAT/StressCheck/TDAS, Casing & Tubular Design Training Courses, Mill Qualification & Surveillance

At Viking, we take flow assurance engineering and modeling to operations. By using a systems engineering approach, Viking addresses the challenges from modeling to development of operational strategies to optimize flow assurance engineering in the production system. Flow assurance modeling is a key aspect of engineering design work, especially in deepwater oil and gas developments.

Failure analysis is a critical process in determining the physical root causes of problems. The process is complex, draws upon many different technical disciplines, and uses a variety of observation, inspection, and laboratory techniques

The planning associated with the operation of Marine Systems should be based on managing exposure to the consequences of mal-operation, in addition to standard marine risk management objectives.

Planning for the disposal of equipment, sealing of the well safely, and recycle and reuse purposes must be performed within the regulation authority.

Topsides and substructure decommissioning capabilities.

The traditional way of isolating a flowline, is to install numerous blind and skillet flanges, as well as utilizing air movers, to clear the flowline of harmful vapors. When utilizing air movers, you aren’t always able to control where the vapors go once released to the atmosphere. Wind direction plays a major part in this process.

Viking Engineering has performed many materials selection projects to help operating companies produce oil and gas safely and within budget.

Complete Lifecycle Stress Analysis, Completion Design, Downhole Equipment Evaluation

GATE follows a similar methodology to threat identification in risk assessment (e.g. FMEA), and analyses the relations between possible causes, and prevention and maintenance measures to highlight the cause(s) to be addressed.

Finite Element Analysis (FEA), Thermo-hydraulic Modeling, Corrosion and Erosion Modeling, Fracture Mechanics Modeling, Fatigue and Stress Analysis, Thermodynamic Modeling and Fit-for-Purpose Software Design

The Corrosion and Materials Team for oil and gas developments and water and gas injection systems forms one of Viking’s core oil and gas engineering services.

Viking can help you design and implement a tailor-made Risk Based Inspection (RBI) Program.

Combining the engineering studies such as modeling, risk identification, etc. with field techniques for inspection, maintenance and surveillance, process efficiency and optimization, and rehabilition operations.

GATE can improvise, implement and manage a cost-effective plan for your asset to ensure safe and continuous operation.

With attention paid to the details of life-cycle, the coating process, and proper scope prioritization, we can get your coatings working for you.

Integrity engineering consulting starts at design stage where the corrosion control strategy is laid-out to reach the desired service life with minimum interruption.

Viking’s industry-renowned expertise on cathodic protection (CP) provides the right solutions for CP design, installation, maintenance and monitoring services.