Flow Assurance Engineering

Design & Engineer It Service
Written By GATE Energy
shutterstock_32454208.jpg

At Viking, Flow Assurance engineering and modeling is designed to assist in project decision making, especially in the following areas:

Flow Assurance Engineering Services

  • Production and Reservoir Engineering

    • Fluid Characterization (Oil, Gas, and Water), Production Profiles, Reservoir Pressure Behavior, Well Completions Requirements, Field Architecture Selection and Well Configurations and Optimization

  • Chemical Systems

    • Chemical Injection Systems, Chemical Qualifications and Screening, and Umbilical Requirements

  • Materials Engineering

    • Materials Selection and Requirements

  • Production Chemistry

    • Fluid Compatibilities, Emulsion Treatments, Foaming Control and Produced Water Treatment

  • Integrity Assurance

    • Corrosion Modeling, Erosion Modeling, Scale Modeling, and Souring Modeling

  • Process Design

    • Topsides Requirements based on Transient Flow Modeling and Production Chemistry

  • Operations and Procedure Development

    • Operating Guidelines and Specialized Procedures based on Steady‐state & Transient Flow Modeling

Consult a Specialist

Featured
Nelson Osorio
Nelson Osorio

Engineering Manager | Production & Reservoir

Nelson is a Chemical and Petroleum Engineer with more than 20 years of experience. Nelson started his career as a Field Operations Engineer in Colombia and later moved to the USA working with ScandPower Petroleum Technology (now part of Schlumberger), GATE, and currently Viking Engineering. His experience includes onshore and offshore projects worldwide.

Phone: 281.870.8455

Resources

Related Technical Articles, Courses & Calculators
GATE Prho™ Simulator

Through recognizing our clients’ needs, our engineering expertise, and our proprietary in-house GATE Prho™ software engine, we provide customizable, cost-effective, easy-to use software tools to deliver better client outcomes quicker.

Read More →
Online Course: Fundamentals of Single-Phase Fluid Flow

This course will cover: Single-phase flow fundamentals, application examples in oil and gas industry, how to perform calculations, and modeling best practices.

Read More →
Online Course: Single-Phase Flow Modeling

This course contains application examples of single-phase fluid flow in oil and gas industry and step-by-step modeling.

Read More →
Online Course: Fundamentals of Multiphase Flow

This online course gives an overview of multiphase flow, how multiphase flow is different from two phase flow, the importance of understanding multiphase flow and the factors that influence multiphase flow.

Read More →
Integrity Management Plan Pitfalls & Best Practices

This article will outline the challenges during integrity management, and the best practices that ultimately deliver a coordinated, effective, and cost-optimized IM plan.

Read More →
Blockage Remediation Part 1: Blockage Characterization & Detection

This series of two articles discusses the diagnosis, detection and remediation of oil and gas production system blockages in detail. The current issue focuses on blockage characterization and detection.

Read More →
Liquid Loading In A Horizontal Shale Gas Well: Prediction, Prevention & Remediation

This GATEKEEPER article focuses on the prediction, prevention and remediation of liquid loading, including discussion of liquid loading analysis.

Read More →
Wax Management Strategy Part 2: Wax Deposition Modeling

The objective of this GATEKEEPER is to provide a high-level overview of the model commonly used in the industry to estimate the wax deposition.

Read More →
Wax Management Strategy Part 3: Design, Development & Maintenance

The design and development of a viable, robust wax management strategy relies upon the economical evaluation of available management techniques.

Read More →
Wax Management Strategy Part 1: Establishing Initial Wax Risk

Wax management strategies developed during Front End Engineering Design (FEED) can mitigate or perhaps even prevent these costs. The goal of this GATEKEEPER series is to provide high-level insight into the planning, execution, and maintenance of wax management strategies.

Read More →
Practical Guidelines for the Diagnosis and Remediation of Pipeline Blockages

One of the primary flow assurance challenges in the production of hydrocarbons is the prevention of pipeline blockages.

Read More →
When To Use Computational Fluid Dynamics In Flow Assurance Studies

As new industry challenges arise, a new approach to multiphase analysis called Computational Multiphase Fluid Dynamics (CMFD) has appeared as a possible solution.

Read More →
Corrosion Modeling: Influencing Factors

This GATEKEEPER will discuss the basic factors influencing corrosion modeling, while a later installment will elaborate on the different corrosion models available and their respective advantages and limitations.

Read More →
Slugging Management

Proper sizing of the flowlines and risers coupled with optimal choking and gas-lift will greatly reduce the risk of slugging and help in efficient management of slugs throughout the life of the field.

Read More →
Paraffin Wax: Formation, Mitigation Methods & Remediation Techniques

Paraffin precipitation and deposition in flowlines and pipelines is an issue impacting the development of deepwater subsea hydrocarbon reservoirs.

Read More →
Pipeline Pigging Part 2: In-Line Inspection For Metal Loss

In this paper, the most commonly used In-Line Inspection (ILI) techniques, methodology and limitations applicable to detecting metal loss and wall thickness measurements are presented.

Read More →
Pipeline Pigging Part 1: Cleaning Pigs & Pigging Strategy

This paper is the first part of a two part series and presents an overview of pig selection criteria for cleaning and maintenance of the pipelines, and covers high level guidance on establishing a progressive pigging strategy.

Read More →
Hydrates: Prediction, Mitigation & Remediation Techniques

In subsea oil production systems, hydrate mitigation methods during steady state operation are almost always based around heat conservation.

Read More →
Corrosion Modeling Of Sweet Flowlines Part 1: Techniques

CO2 corrosion modeling is a common practice to evaluate carbon steel flowlines and piping, both with and without inhibition, to ensure they achieve their intended design life. Modeling is also used to help determine if a corrosion resistant alloy should be used and can also be utilized to determine corrosion allowance and inhibition requirements.

Read More →
Related Services
Modeling & Technology Lab Services
Modeling & Technology Lab Services

Finite Element Analysis (FEA), Thermo-hydraulic Modeling, Corrosion and Erosion Modeling, Fracture Mechanics Modeling, Fatigue and Stress Analysis, Thermodynamic Modeling and Fit-for-Purpose Software Design

Read More →
Flow Assurance Modeling
Flow Assurance Modeling

At Viking, we take Flow Assurance modeling to operations by using a systems engineering standpoint addressing the challenges from modeling to development of operational strategies to optimize the production system.

Read More →
Comprehensive Blockage Remediation
Comprehensive Blockage Remediation

Scalable to turnkey pipeline blockage remediation using our systems engineering approach.

Read More →
Flow Assurance Engineering
Flow Assurance Engineering

At Viking, Flow Assurance engineering and modeling is designed to assist in project decision making.

Read More →
Water Injection Thermal & Fracture Modeling
Water Injection Thermal & Fracture Modeling

Injection into hot and high-pressure deep water reservoirs is often constrained by concerns associated with fracture propagation.

Read More →
Spill Response & Source Control
Spill Response & Source Control

We support operators in oil spill drills, and offers a standalone, fit-for-purpose solution. This partnership provides seamless engineering support, which results in efficient, more effective planning and execution of source control and oil spill response activities.

Read More →
Water Injection Souring & Scaling Modeling
Water Injection Souring & Scaling Modeling

Viking utilizes provides water injection modeling services including integrated flow modeling, souring and scaling modeling and water injection performance modeling.

Read More →
Flow Assurance & Pipeline Cleaning
Flow Assurance & Pipeline Cleaning

BlueFin’s pipeline cleaning solutions deliver crucial benefits to current systems—upstream, midstream, and downstream.

Read More →
Prho™: Flowline Virtual Metering Tool
Prho™: Flowline Virtual Metering Tool

Identify, Understand.

Read More →
GATE Energy
Previous

Comprehensive Blockage Remediation
Next

Water Injection Thermal & Fracture Modeling