Onshore & Offshore Hydrostatic Pressure Testing
Onshore Hydrostatic Pressure Testing Services
Advantages
Electronic monitoring
Procedural execution
Project closure reports
On-staff professional engineering with extensive experience in the field and in the office
Solutions
New Construction
Pipeline Reinstatements
Pipeline Reclassifications
Pipeline Repairs
Dew Point Achievement
Moisture Penetration Achievement
Short Duration Test
Long Duration Test
Electronic Data Acquisition
Standard Deadweight Data Acquisition
Hydrostatic Pressure Testing
Pneumatic Pressure Testing
Applications
Pipelines
Industries: Plants, Petrochemical, LNG, NGL
Maintenance and Turnarounds
Facility Upgrades and Expansions
New Construction
Water Management
BlueFin can help identify and plan water acquisition, storage, filtration, treatment, disposal, temporary piping, pumping, and movement
Cleaning
BlueFin has a wide array of chemical cleaning options.
Leak Detection
BlueFin can assist with determining and using leak detection options for facilities or pipelines.
Testing
BlueFin is fully equipped with pumps, instrumentation, and testing equipment to complete a wide array of testing projects.
Planning
BlueFin has experience in planning complete testing projects from purging, water fill, testing, drying, and recommissioning. We can help with:
Water management, acquisition, treatment, and disposal
Section breaks and pressure requirements
Test procedures, documentation, and test acceptance specifications
Equipment needs, scheduling, and cost estimating
Documentation & Analysis
Test results are thoroughly documented to industry regulatory requirements and your specifications. Engineering analysis and test certification are available.
Flooding & Dewatering
Proper back pressure control and pig selection during line fill and dewatering are important tasks routinely overlooked by most contractors. BlueFin understands how to properly manage water movement in order to minimize air entrapment in the test water and avoid column separation which can lead to air lock.
Drying
Dependent upon the end-use, pipeline assets demand specified dew point and penetration parameters that will ready the system for the intended hydrocarbon product.
Offshore Hydrostatic Pressure Testing
Advantages
Electronic monitoring
Procedural execution
Project closure reports
On-staff professional engineering with extensive experience in the field and in the office
Solutions
New Construction
Pipeline Reinstatements
Pipeline Reclassifications
Pipeline Repairs
Dew Point Achievement
Moisture Penetration Achievement
Applications
Pipelines
Flowlines
Offshore Risers
Production Barges
Offshore Platforms
MOPU’s
Drill Ships
FSPO’s
Water Flooding
BlueFin can provide various subsea filtration options down to 5 microns, including free flooding as well as forced flooding via various downline options. BlueFin can also employ an accurate subsea chemical injection campaign during free flooding. BlueFin owns a range of high volume centrifugal and high pressure positive displacement pumps to satisfy client needs.
Subsea Pipeline / Flowline Cleaning
BlueFin has extensive experience with gel pigging, progressive pigging, and paraffin and hydrate remediation. The BlueFin toolbox also contains technological gems like Lancing tools, The BlueDog™ Tool, and the EelReel tool with proven results.
Water Treatment
BlueFin provides services to remove contaminants, including oil and grease, solids handling utilizing gravity separation and media filtration, and also water quality testing.
Topside System Services
BlueFin can safely and accurately perform helium tracer leak testing, pneumatic testing, N2 soapy bubble testing, tubing testing, chemical flushing, and joint integrity, including bolting and tensioning services.
Subsea Leak Detection
BlueFin can assist with determining and using leak detection options for facilities or pipelines.
Testing
BlueFin is fully equipped with pumps, instrumentation, and testing equipment to complete a wide array of testing projects - subsea pressurization via various downline options.
Helium Leak Testing
Tensioner Testing/Stroking/Commissioning
Soapy Bubble Testing
Pneumatic Strength Testing
Planning
BlueFin has experience in planning complete testing projects from purging, water fill, testing, drying, and recommissioning. We can help with:
Water management, acquisition, treatment, and disposal
Section breaks and pressure requirements
Test procedures, documentation, and test acceptance specifications
Equipment needs, scheduling, and cost estimating
Remediation, flow assurance, system identification for topsides testing
Full pre-commissioning and de-commissioning project management and degreed/professional engineering services
DOCUMENTATION & ANALYSIS
GATE and BlueFin employs flow assurance experts with substantial knowledge in data acquisition and pipeline mapping through surveillance pigging.
DEWATERING
BlueFin provides vessel based and platform based cryogenic and membrane nitrogen services to pig and dewater pipelines. Air compression is also sometimes used to dewater a pipeline with a pig train as long as there are no chemicals in the line able to combust over the parameters of the provide.
DRYING
BlueFin has many times over propelled pig trains while injecting chemical drying agents (MEG, methanol, and LDSI) to meet industry specifications for a dry line ultimately preventing hydrate formation when bringing wells on line.
CONSULT A SPECIALIST - ONSHORE
CONSULT A SPECIALIST - OFFSHORE
Resources
Project Experiences & Case Studies
GATE Energy provided full commissioning and start-up services for facility offshore Gulf of Mexico. Yard commissioning work completed in South Korea.
GATE Energy provided full commissioning and start-up services for facility offshore Gulf of Mexico. Work performed in Singapore and US. Full commissioning services including systems completion utilizing Omega PIMs. Yard phase commissioning in Singapore.
GATE Energy was responsible for pre-commissioning, commissioning, regulatory testing and vendor management for all Topsides systems of the King’s Quay FPU, both in South Korea and the United States / Gulf of Mexico. Viking, the engineering arm of GATE Energy, was contracted to assist with the development of the topsides standard operating procedures (SOPs).
GATE Energy provided umbilical commissioning planning and execution for subsea tieback to Bullwinkle facility offshore Gulf of Mexico.
GATE Energy provided full commissioning and start-up services offshore Israel. Due to various project engineering and construction delays on the Noble Energy Leviathan project, GATE was tasked with compressing seven months of onshore commissioning into only three months. GATE was able to quickly increase resources and personnel to mitigate a schedule impact and Leviathan topside left the fabrication yard one hundred percent commissioning complete for onshore scope. This greatly reduced the amount of potential offshore carry-over work and facilitated a successful offshore campaign to deliver the facility for initial start-up on time.
GATE Energy provided full commissioning and start-up services for subsea tieback offshore Gulf of Mexico. Provided subsea systems completion and umbilical commissioning planning services for subsea tieback offshore.
GATE Energy provided full commissioning and start-up services for subsea tieback offshore Gulf of Mexico.
GATE Energy provided full commissioning and start-up services offshore Gulf of Mexico. GATE provided full systems completion and commissioning services and played a key role in safely delivering the Delta House FPS and achieving first oil just three years after discovery was made by LLOG Exploration.
GATE Energy provided full commissioning and start-up services for tieback to Tarantula facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for subsea tieback to Tarantula facility offshore.
Commissioning provided offshore commissioning and start-up support for subsea tieback offshore Gulf of Mexico.
GATE Energy provided commissioning services for control system hardware replacement on Constitution facility offshore Gulf of Mexico.
GATE Energy provided full commissioning and start-up services for tieback to Lucius facility offshore Gulf of Mexico. Provided umbilical commissioning planning and execution for subsea tieback to Lucius.
GATE Energy provided full commissioning and start-up services for first ever Amine Unit on a floating facility offshore Gulf of Mexico
GATE Energy provided turnkey full commissioning, systems completion and start-up services for facility offshore GoM. Provided umbilical commissioning planning and execution for facility offshore Gulf of Mexico.
GATE partnered with Anadarko to execute full systems completion and commissioning services on the Lucius and Heidelberg Spars. Anadarko employed a “design one, build two” philosophy in development of these new-build, greenfield facilities. Though the Lucius project was a success in its own right, the extensive implementation of project lessons learned and carry-over of personnel led to GATE safely and successfully delivering the Heidelberg project three months ahead of schedule and significantly under budget.
GATE Energy provided full commissioning and start-up services offshore Gulf of Mexico. Provided umbilical commissioning planning and execution for facility offshore Gulf of Mexico.
GATE partnered with Anadarko to execute full systems completion and commissioning services on the Lucius and Heidelberg Spars. Anadarko employed a “design one, build two” philosophy in development of these new-build, greenfield facilities. Though the Lucius project was a success in its own right, the extensive implementation of project lessons learned and carry-over of personnel led to GATE safely and successfully delivering the Heidelberg project three months ahead of schedule and significantly under budget.
GATE Energy provided full commissioning and start-up services for a POB expansion project followed by subsea tieback to Lucius facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for subsea tieback to Lucius.
GATE Energy provided full commissioning and start-up services for tieback to Constitution facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for tieback to Constitution facility in Gulf of Mexico
GATE Energy provided full commissioning and start-up services for tieback to Marlin facility in Gulf of Mexico. Provided umbilical commissioning planning and execution for tieback to Marlin facility in Gulf of Mexico.
GATE Energy provided (full commissioning services for addition of gas lift to Horn Mountain facility offshore Gulf of Mexico.
GATE Energy provided full commissioning services for addition of gas lift to Marlin facility offshore Gulf of Mexico.
GATE Energy provided commissioning management and start-up support for facility offshore Equatorial Guinea.
GATE Energy provided client commissioning oversight and start-up support for FPSO project offshore Ghana. Also provided client subsea commissioning oversight and start-up support for FPSO.
GATE Energy provided client commissioning oversight and start-up support for FPSO project offshore Ghana.
GATE Energy served Anadarko project team as Commissioning Technical Lead responsible for developing commissioning philosophies and influencing field design during Pre-FEED and FEED project stages.
GATE Energy provided full commissioning and start-up services for subsea tieback offshore Gulf of Mexico.
GATE Energy provided systems completion and commissioning execution services provided for onshore gas loading terminal near Haifa, Israel. Planning and Systems Completion efforts primarily located in Houston, TX with regular trips to Israel.
BlueFin maintains the mechanical assets required for the majority of operator’s filtration needs. From offshore pipeline abandonments and produced overboard water compliance, to onshore hydrotest water treatment and fluid handling, our team understands the full lifecycle approach to these scopes.
We provide precision alignment and leveling that assures the operator’s critical component downtime and unnecessary wear is minimized and that unwarranted risks are mitigated.
For cases where safe and complete omission from flames are essential, cold cutting applications deliver safe, reliable results.
For cases where safe and complete omission from flames are essential, field machining and cold cutting applications deliver safe, reliable results.
BlueFin’s tenure and expertise in controlled bolting and joint integrity measures and monitors bolt relaxation, gasket creep, direct load loss, friction variable reduction, and direct axial force.
This industry requirement demands both expertise in trained, accomplished personnel and best in class filtration equipment. BlueFin’s filtration units are capable of high volume and/or low volume filtration and is designed to mitigate particle contamination.
Hydrostatic pressure testing remains an industry standard pre-commissioning and commissioning practice that is a heavily regulated requirement for all branches of the oil and gas industry.